DiyLightAnimation
Store => Finished COOPS => Topic started by: kgustafson on February 21, 2012,
-
THIS COOP IS NOT TAKING ANY MORE ORDERS
Hello DLA Members,
This Co-Op is for the Wireless EX/RX and TX/RX ver 2 kits.
*********************************************************************************
Please read this post completely before participating in this Co-Op.
This Co-Op is for Kits that will include the PCB with parts or parts only.
Kit #1 - TX/RX Parts Only **** CLOSED FOR THIS COOP - NOT ACCEPTING NEW ORDERS ****
Kit #2 - TX/RX Parts and PCB **** CLOSED FOR THIS COOP - NOT ACCEPTING NEW ORDERS ****
Kit #3 - EX/RX Parts Only **** CLOSED FOR THIS COOP - NOT ACCEPTING NEW ORDERS ****
Kit #4 - EX/RX Parts and PCB ***** CLOSED FOR THIS COOP - NOT ACCEPTING NEW ORDERS ****
Kit #5 - TX/RX Enclosure (Case) ONLY - This enclosure is pre-cut to fit the TX/RX and includes mounting screws. **** CLOSED FOR THIS COOP - NOT ACCEPTING NEW ORDERS ****
There will be no PCB only options in this Co-Op.
Controller information can be found here:
http://www.diylightanimation.com/wiki/index.php?title=Equipment#DMX_Wireless_Devices
http://diylightanimation.com/index.php?board=25.0
*********************************************************************************
The Co-Op will be limited to 50 kits of each type.
This Co-Op will close on March 15, 2012 at 8:00 PM Eastern Standard Time zone or when it fills its limit of 250 kits.
Full Payment is expected when the Co-Op is closed. All members will receive PMs or be directed by post with details on how to pay once the Co-Op closes.
Please get your PayPal payments in as soon as you get the Co-Op invoice PM as no orders can be placed until all payments have been received.
By joining this Co-Op you also agree that the Co-Op manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Co-Op at your own risk.
As with any Co-Op this Co-Op is subject to the forum rules. These rules can be reviewed using the following link.
Forum Co-Op rules
http://diylightanimation.com/index.php?topic=111.0
*********************************************************************************
Here is the pricing breakdown based on the initial quote from the vendor.
Pricing is in US Dollars and includes PayPal and Co-Op fees.
We have a base goal of 50 kits. This goal allows the cost per unit to drop low enough to make it cost effective to run the Co-Op. Below this number, we will not make the order.
Kit #1 TX/RX Parts ONLY
Per Kit At Qty 50 - $37.21
Kit #2 TX/RX Parts and PCB
Per Kit At Qty 50 - $41.64
Kit #3 EX/RX Parts ONLY
Per Kit At Qty 50 - $21.19
Kit #4 EX/RX Parts and PCB
Per Kit At Qty 50 - $25.61
Kit #5 TX/RX Enclosure ONLY
Per Kit at Qty 50 - $7.38
This is an estimate. As always higher numbers reduce pricing and lower numbers increase pricing.
Shipping will be by US Postal Service Priority Mail Flat Rate boxes. One to two kits should fit in a small box. Larger orders will require a medium box.
Shipping Charges: for the "Small" flat rate box. (In US Dollars)
Domestic: $5.35
Canada and Mexico: $12.45
All Others: $14.59
Shipping Charges: for the "Medium" flat rate box. (In US Dollars)
Domestic: $11.19
Canada and Mexico: $28.19
All Others: $45.45
If you wish to have insurance on your package it is your responsibility to choose the amount and look up the cost to add. You must add this to your PayPal payment and in the comments explain you paid for insurance and how much. We cannot be held responsible for your package once accepted at the post office and we have a receipt of shipment if it is not insured.
Post with the quantity of each kit you wish in this thread. Please do not post questions or your thoughts in the Co-Op thread. Start a new thread in the correct area for these. Co-Op threads are strictly for people requesting orders. If you later wish to change your quantity please post again clearly stating that this is an update to a previous order and how many you wish it to be now.
If you have any questions please post a new thread to help keep the Co-Op thread clean.
Thanks,
Kurt Gustafson
-
| Member | Kit 1 | Kit 2 | Kit 3 | Kit 4 | Kit 5 | Paid | Shippped | Country |
| AlanS | 0 | 1 | 0 | 3 | 1 | Y | Y | US |
| austindave | 0 | 2 | 0 | 0 | 2 | Y | Y | US |
| AverageJoeTX | 0 | 1 | 0 | 1 | 1 | Y | Y | US |
| barbotte | 0 | 1 | 0 | 5 | 0 | Y | Y | US |
| basis21b | 0 | 1 | 0 | 0 | 1 | Y | Y | US |
| bassmants | 0 | 1 | 0 | 4 | 1 | Y | Y | US |
| bcstuff | 0 | 0 | 0 | 5 | 0 | Y | Y | US |
| Blackbeard | 0 | 0 | 0 | 4 | 0 | Y | Y | US |
| blaha | 0 | 2 | 0 | 5 | 2 | Y | Y | US |
btdb1969 | 0 | 0 | 0 | 0 | 0 | X | X | US |
| cavu2u | 0 | 2 | 0 | 6 | 2 | Y | Y | US |
| craig d | 0 | 0 | 0 | 2 | 0 | Y | Y | US |
| crazybob | 0 | 0 | 0 | 1 | 0 | Y | Y | US |
| edwinpeek | 0 | 2 | 0 | 4 | 2 | Y | Y | US |
| FireMedic4Christ | 0 | 1 | 0 | 5 | 1 | Y | Y | US |
| FredS | 0 | 2 | 0 | 0 | 2 | Y | Y | US |
| fyb2000 | 0 | 2 | 0 | 0 | 0 | Y | Y | US |
| grumpy2076 | 0 | 2 | 0 | 2 | 0 | Y | Y | US |
| Heinekenator | 0 | 1 | 0 | 1 | 1 | Y | Y | US |
| inzeos | 0 | 0 | 3 | 0 | 0 | Y | Y | US |
| jklingert | 2 | 0 | 0 | 0 | 0 | Y | Y | US |
| John K | 0 | 2 | 0 | 0 | 2 | Y | Y | US |
| jshack01 | 0 | 1 | 0 | 1 | 1 | Y | Y | US |
| kgustafson | 0 | 0 | 0 | 4 | 3 | Y | Y | US |
| kjam22 | 0 | 0 | 0 | 4 | 0 | Y | Y | US |
| kpurcell | 0 | 1 | 0 | 1 | 1 | Y | Y | US |
| Kwajtony | 0 | 0 | 0 | 0 | 1 | Y | Y | US |
| LondoB5 | 0 | 1 | 0 | 10 | 1 | Y | Y | US |
| loveroflife96 | 0 | 0 | 0 | 4 | 0 | Y | Y | US |
| maffeirw | 0 | 1 | 0 | 2 | 1 | Y | Y | US |
| Mike Hill | 0 | 2 | 0 | 0 | 2 | Y | Y | US |
| mike2tall | 0 | 1 | 0 | 3 | 0 | Y | Y | US |
| Mimir | 0 | 2 | 0 | 2 | 2 | Y | Y | US |
| mmais68569 | 2 | 2 | 4 | 0 | 0 | Y | Y | US |
| mmorlan62 | 0 | 2 | 0 | 2 | 2 | Y | Y | US |
| MrChristmas2000 | 0 | 0 | 0 | 3 | 0 | Y | Y | US |
| MSL | 1 | 0 | 5 | 0 | 0 | Y | Y | US |
| OkieJay | 0 | 0 | 0 | 3 | 0 | Y | Y | US |
| OneHotRT | 3 | 0 | 3 | 0 | 0 | y | Y | US |
| OriginalHottrodder | 0 | 2 | 0 | 0 | 2 | Y | Y | US |
| Ozmin | 0 | 2 | 0 | 6 | 2 | Y | Y | US |
| Pete | 0 | 0 | 0 | 2 | 0 | Y | Y | US |
| pk | 0 | 1 | 4 | 6 | 1 | Y | Y | US |
| Pokey | 0 | 1 | 0 | 6 | 0 | Y | Y | US |
| rdebolt | 0 | 0 | 0 | 4 | 0 | Y | Y | US |
| richagem | 0 | 0 | 0 | 2 | 0 | Y | Y | US |
| Ron | 0 | 0 | 0 | 2 | 0 | Y | Y | US |
| royce | 0 | 1 | 0 | 1 | 0 | Y | Y | US |
| rrawlings | 1 | 0 | 4 | 0 | 0 | Y | Y | US |
| sabie | 0 | 2 | 0 | 4 | 2 | Y | Y | US |
| sebjsan | 0 | 0 | 0 | 4 | 0 | Y | Y | US |
| segull | 0 | 1 | 0 | 0 | 1 | Y | Y | US |
| smeighan | 0 | 2 | 0 | 0 | 2 | Y | Y | US |
| Steve Gase | 0 | 0 | 0 | 6 | 0 | Y | Y | US |
| taybrynn | 0 | 0 | 0 | 5 | 0 | Y | Y | US |
| tbone321 | 0 | 0 | 0 | 4 | 0 | Y | Y | US |
| tmcteer | 0 | 1 | 0 | 0 | 1 | Y | Y | US |
| tomwb301 | 0 | 1 | 0 | 2 | 1 | Y | Y | US |
| typoagain | 0 | 1 | 0 | 0 | 2 | Y | Y | US |
| Whip | 0 | 1 | 0 | 2 | 1 | Y | Y | US |
| wjgiles50 | 0 | 2 | 0 | 2 | 2 | Y | Y | US |
| wwwgator | 0 | 1 | 0 | 3 | 1 | Y | Y | US |
| TOTALS | 9 | 54 | 23 | 145 | 49 | | | |
-
1 Kit #2
6 Kit #4
Thanks!
-
Qty 3 of Kit #3 - EX/RX Parts Only
-
Kurt
Put me down for the following
2---#1
4---#3
2---#2
Thanks Mike
-
Thanks for doing this. <res.
Qty (5) of Kit #4
-
QTY (4) Ex/Rx parts and pcb Kit #4
-
Please put me down for:
Qty 5 - Kit #4 - EX/RX Parts and PCB
-
Please Note I edited my post quantity.
Should be Qty (4) of Kit #4
-
I got it... will update after dinner
-
Kit #2 - Qty 1
Kit #4 - Qty 1
Kit #5 - Qty 1
-
I'd like 2 of Kit #4.
Thanks,
Rich
-
3 of kit #4
Thanks!
Duane
-
Put me down for:
1 of Kit 2 TX/RX parts and pcb
4 of kit 3 EX/RX parts only
6 of kit 4 EX/RX pcb and parts
1 of kit 5 TX/RX enclosure
-
Please put me down for:
1 of kit #2
1 of kit #4
1 of kit #5
Thanks!
John
-
Please put me down for:
1 of Kit #2 TX/RX parts and pcb
2 of kit #4 ex/rx pcb and parts
1 of kit #5 TX/RX enclosure
Thanks
-
2 of Kit #2
5 of Kit #4
2 of Kit #5
Thanks!
-
1 of Kit #1 TX/RX Parts Only
5 of Kit #3 EX/RX Parts Only
Thanks
MSL
-
2x - Kit #2 - TX/RX Parts and PCB
2x - Kit #4 - EX/RX Parts and PCB
2x - Kit #5 - TX/RX Enclosure (Case) ONLY
Thanks,
Michael
-
I'd like to get:
2 of Kit #2 - TX/RX
6 of Kit #4 - EX/RX
2 of Kit #5 - Case
-
Kit #2 - 1
Kit #4 - 2
Kit #5 - 1
-
2 of Kit 4
Thanks,
Rich
-
Please put me down for:
2 kit #2
2 kit #4
2 kit #5
-
1 kit #2
1 kit #4
thanks
tryed to post earlier disregard if it shows up
-
I would like:
1 kit # 2
3 kit # 3
1 kit # 5
Thank you.
-
1 kit #2 - Tx/Rx
5 kit #4 - Ex/Rx
1 kit #5 - Tx/Rx case
-
2 kit #4 please.
Thanks.
Ron
-
(1) #1 and (4) #3 kits please
-
2 kits of #2
4 kits #4
2 kits #5
Thanks
Edwin
-
2 kits of kit #2
2 kits of kit #5
Thank you for running this coop.
-
Please put me in for 4 of kit #4
-
2 of kit 2
2 of kit 5
PLEASE!!!
Thanks,
Austindave
-
Make sure to check your totals on the second post (page 1 of this topic). I am pretty bad and do get things wrong when translating from the website.
You have been warned! LOL
PM me with corrections!
Kurt
-
Please put me down for:
1 of Kit 2
3 of Kit 4
Thanks,
Mike
-
I would like 4 of kit #4
-
please put me down for
1 x Kit #2
3 x Kit #4
1 x Kit #5
Thank you
-
i would like
1x kit 2
5 x kit 4 ( if that is the one that goes into the lynx to received )
thanks
-
ill take
2-kit 2
2-kit 4
thanks
-
I would like 1 kit 2, 2 kit 4 & 1 kit 5
-
Kit #2 - Qty 5
Kit #5 - Qty 5
Thanks!!
-
Three of kit #4 please.
-
1 kit 2
4 kit 4
1 kit 5
Please and thanks.
-
put me in for 2 kit #2
2 kit#5
4 kit# 4
-
Please include me for
1 of kit 2
3 of kit 4
1 of kit 5
Thanks
-
If I am understanding the wireless properly, I would need 1 TXRX to transmit to 1 universe and EXRX boards for each LE? I also assume a case is not included in the #2 kit.
If my assumption is correct, please put me in for
1 of #2
10 of #4
1 of #5
Thanks!
-
I can't help myself... (please add to my order)
Kit #4 Qty 6
-
Londo,
You are correct. The case is extra (and part of kit #5). With your order you will have 1 TX/RX with all parts, PCB, and ENCLOSURE (because you ordered #2 and #5). You also ordered your multiple order of EX/RX that go inside the Lynx Expresses and other wireless devices (such as the DMX tester, etc.)
Kurt
-
2 of Kit 2
2 of Kit 4
2 of Kit 5
Thanks.
John
USA
-
Please put me down for one of kit #4. Thanks!
-
4 of kit 4 please. Thanks for running this COOP!
-
Please put me down for 4 - #4 (EX/RX board and parts)
Thanks
-
If it's not too late, I'd like:
1 Kit #2
1 Kit #4
1 Kit #5
Thank you.
-Greg
-
qty 2 of kit #4
Thank you,
Pete
-
EX/RX Orders (Kit #3 & Kit #4) are CLOSED
TX/RX Orders are Still Open (Kit #1, #2, & #5)
-
Wow! That went fast. :(
I'd like to be on a standby list for 3 of Kit #4. Aparently a standby list is ok.
-
1 Kit # 5 please.
-
Wow! That went fast. :(
I'd like to be on a standby list for 3 of Kit #4. Aparently a standby list is ok.
Noted. Thanks. This will help to determine if we need to turnaround another coop soon as well.
-
Please PM me if you need your kits shipped to outside the US
Canada/Mexico
or
International
-
Please put me down for
2 - kit #2
2 - kit #5
Thanks
-
1 kit #2
1 kit #5
Thank you
Tom
-
Order revised in reply #63
1ea #2
1ea #5
Sorry if this is a dumb question but does #5 contain two enclosures (1 for the TX, one for the RX)?
Thank you for running this COOP.
-
1ea #2
1ea #5
Sorry if this is a dumb question but does #5 contain two enclosures (1 for the TX, one for the RX)?
Thank you for running this COOP.
No...
#2 is a multi-function device. It can be configured as a transmitter --OR-- it can be configured as a receiver. The enclosure is the same, regardless of how you jumper/configure the device.
-
ONE #2
TWO #5
(I hope someone will part with a #4 later on)
-
Please revise my order to:
2ea #2
2ea #5
Thanks
-
Please change my request. No more #2 or #5 -- only 6 number #4
Kit 1
Kit 2 was 5 now 0
Kit 3
Kit 4 was 6 and still 6
Kit 5 wax 5 now 0
thanks!
-
I think I have all the changes so far. Make sure to continue to check the second post on this topic to ensure the accuracy of your order. Also, please let me know if your order is a NON-US order (if you say nothing, I will assume US shipping). If you are NON-US specify either Canada/Mexico OR International
Thanks
Kurt
-
Please put me down for:
2 #2
2 #5
Thanks
John
-
I would like 2 of kit 4 please
thanks, Craig
-
Craig,
I apologize, but those are CLOSED!!! We have gone over the order by 80+
I closed it last night.
Kit #1, Kit #2, and Kit #5 are still open.
Kurt
-
Kurt, sorry I didn't read page 4, I went straight ot the end. I still have a spare tx/rx from last year. I can use it if I have to. Thanks, Craig
-
Yeah, unfortunately (or perhaps this fortunately for the robustness of the group) the EX/RXs went very quick. I allowed it to stay open longer than I normally would just to try to get some of the stragglers in and I had to close it last night for fear of completely busting the limits set by the COOP rules. I will keep you on a waiting list (if you want me to) in case anyone decides to drop their Kit 4 orders.
Kurt
-
Kurt - Put me down for 2 of kit #2, 2 of kit #5.
If there is a waiting list I would like to be added. (Dang, this thing filled up quickly)
Thanks - Bill A.
-
Kurt, Yes please keep me on the backup list. Shoot me a PM if I get lucky.
Thanks for all the work, Craig
-
please put me down for
qty 2 of kit#2
qty 2 of kit#5
thanks
sean
-
I would like
1 Kit 2
1 Kit 5
Thanks
-
I would like 2 kit #2 (RX/TX with PCB)
-
NavyGator backed out of this COOP.
Craig D, it is your lucky day. You will take over his COOP (he ordered 2 X Kit #4) same as you wanted.
Ozman, you are on the waiting list in case anyone else backs out.
Kurt
-
1 of kit #2
1 of kit #5
USA
THANKS
-
Would also like to be added to the "dang I didn't get in on time" list for 1 of kit #4
Thanks
-
I would like 2 of Kit#1
-
**** COOP IS CLOSED ****
-
All,
PMs will be going out later this week. DO NOT SEND MONEY until you receive the final tally from myself.
PLEASE CHECK YOUR ORDERS NOW!!! I am not perfect. I make mistakes (and have a few times here already). Make sure your order is accurate on the 2nd post of this forum.
Kurt
-
WOW, thank you Kurt. I was just giong to turn this thing off for the night and saw an e-mail from you. You should have some money in your pay-pal. Thanks again, Craig D
-
Update 001 -- 02/22/2012
Major Activity:
- COOP Closed
- PMs sent to each member (please let me know if you did NOT receive a PM -- OR if you feel the order is wrong in some way PM me so we can get it straightened out)
- Initial Payments coming in (WOW, you guys are really amazing!)
Awaiting:
- All members to Pay! The sooner we all pay, the quicker I can order the parts from the various vendors, receive it all, get this stuff sorted and sent to y'all!
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
payment sent
-
Grumpy,
Got it. Thanks!
Kurt
-
Kurt please post the final prices in the thread for future reference for those who were not in this coop. I still have not built all the ones from last year so I am not in this coop.
-
Kurt - GREAT JOB on the COOP!!!! Thanks for running it!!!! Payment sent........
Bill A.
-
GREAT JOB on the COOP!!!! Thanks for running it!!!! Payment sent........
david p
-
thank's for the coop paymennt sent. :)
-
Payment Sent.
Thanks for running the Coop. :)
-
Kurt please post the final prices in the thread for future reference for those who were not in this coop. I still have not built all the ones from last year so I am not in this coop.
I am very much against doing this, since our final numbers were much higher than the 50 that were initially quoted. Stated another way, we got a very good discount on the EX/RXs because we will be ordering so many of them (3 X expected) and this will in turn incur savings more than expected. The next COOP for wireless may have less than this or more than this.
Kurt
Kit 1 @ $34.16 each
Kit 2 @ $38.34 each
Kit 3 @ $19.20 each
Kit 4 @ $22.96 each
Kit 5 @ $5.46 each
-
Thanks Kurt
Your caveat on not expecting the same prices is correct. I have paid more and less than these in previous coops. But it serves to give people some idea of what could happen in a coop. It also helps me when I decided to quit using some piece of equipment and need to figure out what I paid for it when I got it. Maybe I just need to improve my record keeping - LOL. And I have been trying to do that better this last year.
-
Glad I could help out. Just want to make sure we set expectations. The last thing I want is flame PMs about cost! LOL.
Kurt
-
Update 002 -- 02/24/2012
Major Activity:
- Receiving Payments. Only 18 to go! 70% paid.
- Ordered the LEDs (green and red) and the Capacitors (these were the non-Mouser orders that Mouser was out of)
Awaiting:
- All members to Pay!
- Order enclosures
- Order PCBs
- Order rest of parts from Mouser
- Receipt of all items
- Sorting
- Shipping
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Payment sent, sorry for the delay.
OkieJay
-
OkieJay,
Not really a delay so nothing to really worry about. I don't worry about payment until it is about a week old. We have done pretty well with only 10 or so payments left for a COOP that closed less than a week ago. I did get your payment, thanks.
Kurt
-
Update 003 -- 02/26/2012
Major Activity:
- Receiving Payments. Only 8 to go! 87% paid.
- Ordered the Wireless PCBs
- Sent Purchase Order for enclosures
- Enclosures ordered. Due in 3/18/2012.
Awaiting:
- All members to Pay!
- Receipt of parts from Allied and Digikey
- Receipt of PCBs
- Receipt of enclosures
- Order and pay for rest of parts from Mouser
- Receipt of parts from Mouser
- Sorting
- Shipping
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
All,
If anyone missed this COOP we have had a recent backout. PM me if interested (please include what you are looking for)
Thanks,
Kurt
-
PM sent.
Jerry
-
PM Sent for backout.
Thx,
Randy
-
Update 004 -- 02/28/2012
Major Activity:
- Receiving Payments. Only 2 to go! PLEASE PAY IF YOU HAVE NOT DONE SO YET. We are all waiting on you to pay!
- Received parts from Allied and Digikey (LEDs and Capacitor)
Awaiting:
- All members to Pay!
- Receipt of PCBs
- Receipt of enclosures (3/18)
- Order and pay for rest of parts from Mouser
- Receipt of parts from Mouser
- Sorting
- Shipping
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Update 005 -- 02/29/2012
Major Activity:
- Receiving Payments. Only 2 to go! (I have heard from one of the 2 outstanding, if you are the other, please contact me if you still want to be part of the COOP)
Awaiting:
- All members to Pay!
- Receipt of PCBs
- Receipt of enclosures (3/18)
- Order and pay for rest of parts from Mouser
- Receipt of parts from Mouser
- Sorting
- Shipping
Notes
I have a verbal for payment on one of the two outstanding payments. The other has not responded yet. If I do not hear from the other person by Friday, I will be releasing their order to the waiting list. ALL orders are accounted for (so no need for additional people to request additional orders for the folks who have or may backout of the COOP.)
This will all be settled by Friday 3/2/2001 @ 7pm EST.
If you are on the waiting list, I will PM you guys whether we are able to fulfill your request and any payments you will need to make -- in other words, you are in or you are out of this COOP. These will go out this weekend (most likely).
So far the long pole is the enclosure order -- which has been made -- and is due to me by 3/16. I do not see any major back orders for Mouser, however, I have yet to make that order, because I am waiting for the final payments and waiting list folks to work out by this weekend.
I will also have the final numbers for the cost of everything which I know pretty well already, however, some adjustments may be made in your favor. If refunds are due, these will come after everything is ordered, and ready to ship. Also, some refunds may come as I compress some of the orders into smaller boxes (the small flat rate box) that I thought would only fit into Medium flat rate boxes. Again, I will know better when the orders are sorted and prepared for shipping. Then and only then, will I be ready to apply any refunds to the COOP group.
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Update 006 -- 03/01/2012
Major Activity:
- Receiving Payments. Only 1 to go! (I have a verbal on payment, just haven't seen it come in yet)
Awaiting:
- Last member to Pay
- Receipt of PCBs
- Receipt of enclosures (3/18)
- Order and pay for rest of parts from Mouser
- Receipt of parts from Mouser
- Sorting
- Shipping
- Refunds
Notes:
I am looking to order the parts from Mouser this Monday so if you are a last payer, we really need you to pay up!
All PMs went out about folks who were asking for anything left over (back-outs). You should have heard from me (most did not get want they wanted due to the fact there were no additional Kit #4 available!) If you were lucky enough to get an order from the back-out we had, please pay promptly (aka this weekend!)
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Update 007 -- 03/03/2012
Major Activity:
- All payments from original members received
- One of two payments received from the two add-ons that made up the slack from the dropped member
- Ordered the final part count from Mouser.
Awaiting:
- Last add-on member to Pay
- Receipt of PCBs
- Receipt of enclosures (3/18)
- Receipt of parts from Mouser
- Sorting
- Shipping
- Refunds
Notes:
COOP is on track and things are going smoothly (Okay--now I jinxed it!) As you can see the 'long-pole' is the enclosure order. Looks like 3/18 is the delivery date. I am due to go on travel on the last week of March, so I hope that I can get everything sorted and shipped before I am out that week. Of course, that is assuming all continues to go smoothly
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
thanks for running the coop
just warming up my soldering iron and patiently waiting
-
Ok, payment sent early this morning. Thanks for doing coop Kurt.
Joe
-
Joe,
Got it. Thanks. At this point everyone has paid!
Everything has been ordered and we are just waiting on the parts to come in at this point
Kurt
-
Update 008 -- 03/05/2012
Major Activity:
- All payments from original members received
- All payments from add-on members received
- All parts, PCBs, and enclosures on order
Awaiting:
- Receipt of PCBs
- Receipt of enclosures (3/18)
- Receipt of parts from Mouser
- Sorting
- Shipping
- Refunds
Notes:
None for this update.
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Kurt,
I like the update format! Keep up the good work and communications!
Regards,
Leif
-
Update 009 -- 03/07/2012
Major Activity:
- All payments from original members received
- All payments from add-on members received
- All parts are in and accounted for
- All PCBs, and enclosures on order
Awaiting:
- Receipt of PCBs (3/15)
- Receipt of enclosures (3/18)
- Sorting
- Shipping
- Refunds
Notes:
Received notification that parts are shipping. I have begun to acquire shipping supplies (packing material, tape, etc.) and am going to order the boxes from USPS today.
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Came home from Lenten services at church and found four boxes from Mouser on my door step (and two from Triaxal Labs -- my animated skulls for Halloween! Woohoo!) I will update my last update to reflect receipt of all parts from mouser.
Now we just need PCBs (which should arrive by the 15th) and the enclosures (which should arrive by the 18th).
Kurt
-
Update 010 -- 03/09/2012
Major Activity:
- All payments from original members received
- All payments from add-on members received
- All parts are in and accounted for
- All PCBs, and enclosures on order
- Begun sorting parts
Awaiting:
- Receipt of PCBs (3/15)
- Receipt of enclosures (3/18)
- Receipt of USPS boxes for shipping
- Shipping
- Refunds
Notes:
I have sorted the non-static parts for the 64 TX/RX orders and 100 of the EX/RX orders.
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Update 011 -- 03/12/2012
Major Activity:
- All payments from original members received
- All payments from add-on members received
- All parts are in and accounted for
- All PCBs, and enclosures on order
- Sorting parts (75% complete)
Awaiting:
- Receipt of PCBs (3/15)
- Receipt of enclosures (3/18)
- Receipt of USPS boxes for shipping
- Shipping
- Refunds
Notes:
I only have to sort the 171 orders for static sensitive parts for the EX/RXs. Still waiting for the PCBs and enclosures.
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Will you be shipping the part only orders separately or all at once?
-
I will be shipping each order grouped how the member ordered them. I will not break shipments into parts. You will receive a single box (either small or medium flat rate) based on how it packs.
I will be shipping them in the order in which I received the request (meaning First In - First Out), with the exception of those that may have parts only orders (or assuming the PCBs come in before the enclosures -- those who did not order enclosures). Trust me, I don't want all this equipment in my house longer than it needs to be! LOL
Kurt
-
Update 012 -- 03/17/2012
Major Activity:
- All payments from original members received
- All payments from add-on members received
- All parts are in and accounted for
- All parts sorted
- All PCBs, and enclosures on order
Awaiting:
- Receipt of PCBs
- Receipt of enclosures (3/18)
- Receipt of USPS boxes for shipping
- Shipping
- Refunds
Notes:
Finished sorting all the parts. Still waiting for the PCBs and enclosures. I will check to see if I have any orders that are all parts (no PCBs and no enclosures). If I do, I will ship those out this Monday (however, I don't think I have any like that.)
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Thanks Kurt for all your hard work on our behalf
-
Turns out we have 5 orders that are parts only orders.
They are boxed, labeled and will be dropped off at the post office tomorrow.
Kurt
-
Update 013 -- 03/20/2012
Major Activity:
- All payments from original members received
- All payments from add-on members received
- All parts are in and accounted for
- All parts sorted
- All PCBs received
- All enclosures received
- All shipping boxes received
Awaiting:
- Shipping (16 of 61 shipped)
- Refunds
Notes:
Received PCBs and Enclosures on the same day (today). Begun packaging and shipping all orders.
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Thanks Kurt got my shipping notification. You have done a fantastic job. Your updates were very helpful throughout the process.
-
IMPORTANT NOTE ON UNPACKING YOUR WIRELESS PARTS
All,
Note that when you are unpacking your parts for both the EX/RX and TX/RX static sensitive parts (the stuff in the anti-static silver bag), that there will be a smaller wrapped anti-static bag (another silver bag) that contains JUST the radio chip. Don't think this is padding, trash, or an extra anti-static bags that I am just filling in your bag for the heck of it. It is the chip for your radio to work! Please unpack carefully, since this could easily be mistaken for trash.
Thanks,
Kurt
-
Thanks for the shipping notification today...running out of excuses, I actually may ave had to start on the wifes honey-do list.....but now I got this to work on !! Whew that was close ;D
-
Thanks for the shipping notification today...running out of excuses, I actually may ave had to start on the wifes honey-do list.....but now I got this to work on !! Whew that was close ;D
Hehe. It is my goal to have everything shipped by this weekend (I am going out of town for a week, so I am trying to get it out before I do.)
Kurt
-
That would be a good thing. <pop..
-
Great job!
It is always nice when they are heading out the door.
RJ
-
Thanks, my parts arrived yesterday. Now the boards and case that have been sitting on the bench for months have no excuse but to get built now. Thanks again for your efforts.
-
17 more boxed that will go out tomorrow. Please make sure to double check my packing job. My in-laws are visiting and many times I am being distracted (I won't blame my Mother in law, but...LOL) and I seriously don't want anyone to have the let-down of missing things.
Any issues I will fix as soon as possible.
Thanks,
Kurt
-
<la.. how true
-
IMPORTANT NOTE ON UNPACKING YOUR WIRELESS PARTS
All,
Note that when you are unpacking your parts for both the EX/RX and TX/RX static sensitive parts (the stuff in the anti-static silver bag), that there will be a smaller wrapped anti-static bag (another silver bag) that contains JUST the radio chip. Don't think this is padding, trash, or an extra anti-static bags that I am just filling in your bag for the heck of it. It is the chip for your radio to work! Please unpack carefully, since this could easily be mistaken for trash.
Thanks,
Kurt
My dog thought one was a treat, and she ate it.
Now all I have to do is hook up Mr Microphone, tune it to 89.7, and she comes trottin home.
No kidding ! ... ;D <fp. ;D
Seriously Kurt,
Thanks for the quick ship.
Received mine yesterday.
My wife knew what was in the box before I could open it.
Was not a pleasant evening. <md.. :-[
How do I make her understand?
Randy
-
Received my package today here in Denver. My wife wants to know where I am going to put all of this stuff. The living room is not acceptable to her. I just don't understand why not...
-
Received my package today here in Denver. My wife wants to know where I am going to put all of this stuff. The living room is not acceptable to her. I just don't understand why not...
Wireless and ED in the same day... it's like Christmas up there! Poor mom... but at least she has a place to park in the garage after how many years? LOL.
-
Did the boxes ship. I'm getting a wee bit jealous....... :)
-
Thomas (MrXmas)
These are shipping in the order in which I received payment. Yours is boxed (just to taunt you, I am holding it my hands right now--waving it in front of the computer screen and grinning evilly). I ran out of labels, so you should get a message tomorrow (actually since it is past midnight here, later today! LOL) that is, once I run to Staples and get more labels!
Kurt
-
Update 014 -- 03/24/2012
Major Activity:
- All payments from original members received
- All payments from add-on members received
- All parts are in and accounted for
- All parts sorted
- All PCBs received
- All enclosures received
- All shipping boxes received
Awaiting:
- Shipping (49 of 61 shipped)
- Refunds
Notes:
Packing and Shipping like crazy!
PLEASE CHECK YOUR ORDERS WHEN YOU RECEIVE THEM!!! I cannot stress this enough. I have already had one dumb packing job by myself and sent out the fix today. I truly was distracted a lot while packing, which is not a good thing. Make sure to check that you received all your wall warts if you ordered TX/Rx parts (every kit 1 and kit 2 should include a wall wart power supply). Make sure you got all your PCBs (I have no extras after packing them all, so I am probably good with that one). Make sure you have all your parts as well. I didn't end up with extra kits, so I probably actually got that one right as well -- meaning after fixing the issue with pk's order (sorry PK).
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Quick update:
8 more shipped today. 57 of 61.
The last four of you guys will have to wait a tad longer. One, I am waiting for a US address for before shipping (they did not want to ship internationally). The other three are victims of a shipping snafu that I had for PK. I sent him the wrong parts (TX/RX parts instead of EX/RX parts). Unfortunately, I need those parts to complete the three orders of these poor members who were at the tail end of the COOP. Once those parts come in, I will get them boxed and shipped immediately.
Thank you for your patience with me.
Kurt
-
IMPORTANT NOTE ON UNPACKING YOUR WIRELESS PARTS
All,
Note that when you are unpacking your parts for both the EX/RX and TX/RX static sensitive parts (the stuff in the anti-static silver bag), that there will be a smaller wrapped anti-static bag (another silver bag) that contains JUST the radio chip. Don't think this is padding, trash, or an extra anti-static bags that I am just filling in your bag for the heck of it. It is the chip for your radio to work! Please unpack carefully, since this could easily be mistaken for trash.
Thanks,
Kurt
My dog thought one was a treat, and she ate it.
Now all I have to do is hook up Mr Microphone, tune it to 89.7, and she comes trottin home.
No kidding ! ... ;D <fp. ;D
Seriously Kurt,
Thanks for the quick ship.
Received mine yesterday.
My wife knew what was in the box before I could open it.
Was not a pleasant evening. <md.. :-[
How do I make her understand?
Randy
I am going to suggest to RJ that we use boxes from Zales, Kay Jewelers, or Tiffanys when sending all future COOPs. We could expand the boxes later to some haute couture outfits such as Neiman Marcus, Saks Fifth Avenue, and Nordstroms. For those who have spouses with less expensive tastes we can offer, JC Pennys, Macys, and Dillards. If you are female and trying to hide from your husband we will include a full line of feminine hygiene box lines that will guarantee that the snooping spouse will NEVER touch.
*smile*
-
<la..
Got my shipping notice today. Now the anticipation . . . . . . . . :)
Thank you for the hard work.
-
I am going to suggest to RJ that we use boxes from Zales, Kay Jewelers, or Tiffanys when sending all future COOPs. We could expand the boxes later to some haute couture outfits such as Neiman Marcus, Saks Fifth Avenue, and Nordstroms. For those who have spouses with less expensive tastes we can offer, JC Pennys, Macys, and Dillards. If you are female and trying to hide from your husband we will include a full line of feminine hygiene box lines that will guarantee that the snooping spouse will NEVER touch.
*smile*
[/quote]
Don't do that, then she will be REALLY pi**** off when she opens it and sees circuit boards, resistors, diodes... <fp.
-
Got my part's today Kurt. Now to wave my magic wand and its done. ;) ::)
thanks kurt for the coop.
-
Thank you Kurt. Nice job packing. Got mine in Michigan today. All looks great.
Thanks again for running this coop, Craig
-
Package received today.
Thanks for your hard work. <res.
Now since I have received both coops at once I will generate a lot of smoke. ;D
-
Update 015 -- 03/26/2012
Major Activity: - All payments from original members received
- All payments from add-on members received
- All parts are in and accounted for
- All parts sorted
- All PCBs received
- All enclosures received
- All shipping boxes received
- Shipped 57 of 61
Awaiting:
- Shipping 4 remaining
- Refunds
Notes:
Begun seeing notices of people receiveing the packages. The four people with outstanding shipments are: segull, AverageJoeTX, barbotte, and fyb2000. Unfortunately I am on a business trip that I iwll not be able to return from until Sunday. I will work to get the packages out at that time. I apologize to the four for the delay, but it could not be helped.
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Received mine today.
Thank you Kurt.
-
I received mine today as well. My collection grows.
-
Got it today and it's all together. Now to see if it works. The unknown is killing me. <fp.
-
I received my kits today in Ausin.
Thanks for all of the hard work -- very nicely done!
-
Received mine today. Thank You.
-
Received mine yesterday! Thanks Kurt for running this COOP! <res.
-
Received mine yesterday in Oklahoma - thanks for running the coop!
I already have one TX/RX and one EX RX built and operational - cool. 8)
-
Received my kits today.
Thanks a TON Kurt for all the work you had to do to save us some money! <res. 8)
John
-
Mine showed up today. Thank you for all your hard work!
Sent from my iPad using Tapatalk HD
-
Got mine yesterday, now I just have to find the time to build them.... And build my displays.....and sequence my songs.....
Is it april already?
-
Any estimate for the poor 4 souls that were out of luck?
What color is an apple? Apparently not green or yellow...let's see if red is correct
-
fyb2000,
The update for the unlucky 4 is that I they will ship on Monday at the soonest (I fly back home this coming Sunday from my trip). That will -- most likely mean you will be seeing them show up next week (wednesday) or so. I am sorry about the delay (I am writing this from my hotel room in the good old St. Louis -- I have a great view of Busch stadium -- too bad it isn't baseball season yet.) I hope you can continue to be patient with me.
Kurt
-
Hi Kurt,
I received my kits last week.
Just wanted to let you know how much I appreciate you running the coop. Never ran one but can tell it has to be time consuming.
Thank you!
MSL
-
Hi Kurt,
I am one of the four & hey I'm just glad I was able to get one. This coop sold so fast, which I think is great cause it means the community is growing, so no worries. Thank you very much for doing the coop that alone appears to be a great deal of work. All you coop managers need to always be commended for your hard work.
Again Thanks <res.
Joe
-
No worries there Kurt,
Enjoy St Louis, it's a great town.
Cheers
-
Update 016 -- 04/02/2012
Major Activity:
- All payments from original members received
- All payments from add-on members received
- All parts are in and accounted for
- All parts sorted
- All PCBs received
- All enclosures received
- All shipping boxes received
- All 61 shipped
- All 61 refunds issued
Awaiting:
Nothing - woohoo!
Notes:
I got back in town late last night and finished the last four orders which went into the mail today. I issued refunds via paypal. We received some discounts due to volume as well as shipping costs being less via paypal.
If at any time you need to contact me for any reason, please PM me. I will attempt to get back to you as soon as I am able!
Thanks,
Kurt
-
Kurt,
Great job running this coop. Received my refund today.
I think you've set a new standard and example that other coop managers can learn from.
Regards,
Leif
-
All refunds are issued. You all should have received (or are receiving for you unlucky 4) your orders and have your refunds via paypal.
The gross accounting was the following:
Total Received $7,202.14
Total Spent $6,724.75 (this includes the $191.70 for overcharge on the EX/RX boards @ $1.35 each)
Total for Refund $ 477.39
I ended up refunding $191.70 total for the people ordering EX/RX boards (142 boards @ $1.35) and $477.39 to the entire COOP membership (for overages in Paypal fees, shipping, etc -- key thing to remember is that when we asked for you to pay, we only had an estimate of what it all was gonna cost. This represents the actuals against the estimate and the delta between the two is the refund to you all.)
If anyone really wants the gory details of the COOP, I will gladly provide my accounting to them. Now it is time to relax! LOL
Kurt
-
Thanks Kurt, I was wondering what the refund was all about. Again great job putting together the coop :)
-
Ditto.
The refund was a suprise.
Thanks for your honesty in conducting this coop. <res. <res. <res. <res.
-
Big surprise on the refund. Thank you very much. I hope you are able to do more in the near future.
Kudos!
-
Excellent job Kurt!
Thank you for all of of the time and effort you gave us to see it through.
:)
Ed
-
Going to lock the thread now that this is done.
If anyone has any issues after this locks, please just PM me to resolve.
Thanks,
Kurt