DiyLightAnimation

Hardware => Lynx Wireless DMX => Topic started by: taybrynn on October 20, 2012,

Title: No red light on ex/rx but green light blinks normally
Post by: taybrynn on October 20, 2012,

Has anyone had an ex/rx with a red led which doesn't light up?

One of mine is doing this and I'm not sure if its working still.

Title: Re: No red light on ex/rx but green light blinks normally
Post by: tbone321 on October 21, 2012,

The Red light is the power light.  If it is out then it is either because the unit is not getting power or the LED failed.  If the green light is flashing then it is probably a failed LED or low power.

Title: No red light on ex/rx but green light blinks normally
Post by: taybrynn on October 21, 2012,

Thanks ... I guess I need to see if it works.

Title: Re: No red light on ex/rx but green light blinks normally
Post by: Dennis Cherry on October 21, 2012,

You are not allowed to view links. Register or Login

Thanks ... I guess I need to see if it works.

Might also what to check you have the polarity of the LED correct.

Title: Re: No red light on ex/rx but green light blinks normally
Post by: chrisatpsu on October 21, 2012,

You are not allowed to view links. Register or Login

Has anyone had an ex/rx with a red led which doesn't light up?

One of mine is doing this and I'm not sure if its working still.

is this connected to an Express?  or used as a mod for another piece of equipment?

Title: Re: No red light on ex/rx but green light blinks normally
Post by: taybrynn on October 22, 2012,

Connected to an Express. 

Thanks Dennis ... I checked and the LED was on backwards.  I replaced it and it and the power LED works now!  ;D