DiyLightAnimation
Hardware => Lynx Wireless DMX => Topic started by: DanHouston on October 31, 2012,
-
It looks like someone already updated the BOM for discontinued part# 163-7620-E to be the previously recommended part# 163-7620E-E. I completed building 2 about two weeks ago and while the part does work I did have to file down a couple of the legs to fit in the hole on the PCB. Not sure if others have experienced this or not.
Thanks,
Dan
-
I ran into this during my build today. Everything fit nicely after filing two of the legs down. I haven't tested yet though, as Mouser seems to have messed up a good portion of my order.
Instead of red LEDs, I got a two large four pin metal terminal connectors. <fp.
They also didn't pack the 330 ohm resistors, and gave me the too large (i believe they are 1/2 watt) 180 ohm resistors.
Does Mouser screw up orders this bad quite often?
-
Does Mouser screw up orders this bad quite often?
Sorry to hear about your issues! As with any company mistakes will happen, but I must say that I have placed over 30 orders from Mouser and have never had a wrong part. I must say that with all of the small parts that they are dealing with I would expect more mistakes. Maybe you got all of the mistakes in one order! <fp.
-
Maybe the guy packing my order was a newbie. I expect that companies mess up once in a while, it just seemed like many mistakes in one order. Good to know this isn't a normal thing for them.
I sent them an email last night asking how this can be fixed. Hopefully I hear back from them soon.
-
I have ordered many times from mouser, and only had 1 item missed. Mouser sent me the missed item and a couple sample items.
I have no worry when placing an order.
-
They are overnighting the missing parts at no charge to me. The issue was taken care of very quickly. Must have just had bad luck on this order.