Author Topic: USE:  (Read 973 times)

Offline chrisatpsu

  • Sr. Member
  • ****
  • Posts: 3729
  • ahhh, yes... my new blink-i-nator 3000!!!
USE:
« on: November 08, 2012, »
(Example with pixelnet firmware)

you have a really big show....
over 16384 channels....

you sequence channels 1 to 16384 and save as a file
this file will be placed on the Conductor
the mp3 song is placed on the Conductor
your transmitter is connected to the audio out jack of the Conductor
all of your controllers for the first 16,384 channels are connected to the rj45 jack (the one without the leds)
the Conductor sends a synch signal to the Slave via the Ethernet port (the one WITH the leds)

you sequence channels 16385 to 32,768 and save as a file
this file will be placed on the Slave
all of your controllers for the second 16,384 channels are connected to the rj45 jack (the one without the leds)
the Slave receives it's synch signal from the Conductor via the Ethernet port (the one WITH the leds)
To rule the entire tri-state area!  What's that? Perry the Platypus!!!

Offline mkozik1

  • Sr. Member
  • ****
  • Posts: 326
  • Monroe, GA 30655
Re: USE:
« Reply #1 on: November 08, 2012, »
GREAT EXPAINATION CHRIS !!!!   <res.

I was trying to figure out why I got both in this last COOP but nothing to hook the slave to!  Now it makes sense.

Go ahead and keep those posts up  ;), You Rock !!

- Mark