Author Topic: 50 / 50  (Read 975 times)

Offline keithr

  • Sr. Member
  • ****
  • Posts: 145
50 / 50
« on: November 27, 2012, »
Odd behavior. Have 4 LE v5 that on the bench all 16 out puts connected to 100 ct LED's; All works fine.

Place in the yard connect all 16 channels up and only half the controller works 1-8, no activity 9-16. Brought back all controllers and benched again all is fine.

I feel an elctrical germlin is at hand here, any help is most appreciated.

Seasons Greeting to All...

Offline onesmoothhead

  • Sr. Member
  • ****
  • Posts: 865
  • 87031
    • Listen to the Lights New Mexico
50 / 50
« Reply #1 on: November 27, 2012, »
Do you have power going to both power input areas? 1-8 are on one power source and 9-16 are on the other.


Sent from my iPad using Tapatalk HD

Offline Jeffl

  • Sr. Member
  • ****
  • Posts: 1020
  • Just remember. Wireless is nice. Copper is king!
    • Christmas In Brandon
Re: 50 / 50
« Reply #2 on: November 27, 2012, »
I had this happen on a LOR setup I had with two controllers in it and half the boards were powered to each one.  Talk about a headache.  I had two power cords with a tripple tap on each with the power cords on the controllers swapped and one of the extension cords with a tripped GFCI.

I think I had a better chance of wining the lottery than having this happen.