Author Topic: Etherdongle COOP CLOSED FOR ORDERS (Read 46338 times)

pwalstead · « **Reply #105 on:** July 17, 2013, »

Please add 1 kit #2 to my order.

combustionmark · « **Reply #106 on:** July 17, 2013, »

Bump my request to 6 of kit #2.

Have new plan, and a new house.

jnealand · « **Reply #107 on:** July 17, 2013, »

In case you didn't see my PM to you in reply 95 page 7 I requested one kit #2. You are showing me as one kit #1.

oj70chevy · « **Reply #108 on:** July 17, 2013, »

I know you have lot on your plate but same for me post #86, I asked to change mine from kit # 1 to a kit #2.

Sorry for the confusion and Thanks for running this coop..

drlucas · « **Reply #109 on:** July 18, 2013, »

Have to cancel my participation this time around. Please change my order to 0. Sorry

tstewart · « **Reply #110 on:** July 18, 2013, »

I will be catching up with the changes to the list tonight.

Todd

Sent from my Galaxy Nexus using Tapatalk 2

tstewart · « **Reply #111 on:** July 18, 2013, »

List has been updated with the messages that are in this thread. I still have some PM's to get to. I will do them tomorrow night.

Todd

scott_aus · « **Reply #112 on:** July 20, 2013, »

Hi,

Could I please get 2 x Kit #2

Thanks, Scott

tindivall · « **Reply #113 on:** July 20, 2013, »

New here and a bit confused, i am sure there is an explanation.... when i go to the wiki for the etherdongle and then click the link to go to mouser, it is showing total price before shipping at $55.59, yet the COOP is more expensive at $98.79....

tstewart · « **Reply #114 on:** July 20, 2013, »

The mouser parts list does not include the PCB board with the two surface mount chips installed. If you look in the store the cost on that is $43. There is also the case and the magicjack that are not purchased from Mouser.

Todd

You are not allowed to view links. Register or Login

New here and a bit confused, i am sure there is an explanation.... when i go to the wiki for the etherdongle and then click the link to go to mouser, it is showing total price before shipping at $55.59, yet the COOP is more expensive at $98.79....

tindivall · « **Reply #115 on:** July 20, 2013, »

See I knew there was an reason

thanks

Could I sign up to get 2 of kit #2 please

Also another newb question... How would one know that the moser listing didn't include the board, and how would I order a board if I ever needed to (in case coop not going on)

urthegman · « **Reply #116 on:** July 20, 2013, »

You would click the store button on the red bar above and if the store was out of stock, check the for sale section and if nothings there, you could start a "looking for post" in the for sale section.

typoagain · « **Reply #117 on:** July 20, 2013, »

You are not allowed to view links. Register or Login

Also another newb question... How would one know that the moser listing didn't include the board, and how would I order a board if I ever needed to (in case coop not going on)

Take a look at the wiki again. Just under the link to Mouser you will find 2 more links. These are the places where you will find the Jack and the case.
If you see other links posted in teh wiki you need to check what they are for because that is where you will find the other parts.

That is the great part about the coops; in this one you do not need to pay for shipping for parts from three different places PLUS you get the boards with the cutouts already in them.

In this co-op I figure that you will save in the neighborhood of $25 plus not have to make the needed cutouts. That is a great deal!

diceman3807 · « **Reply #118 on:** July 20, 2013, »

(2) of kit 2 please....

Thanks...

ahb2ukeith · « **Reply #119 on:** July 20, 2013, »

1 kit # 1.

DiyLightAnimation

News: