Author Topic: Bobcat 6V power supply  (Read 1017 times)

Offline diceman3807

  • Full Member
  • ***
  • Posts: 52
Bobcat 6V power supply
« on: July 15, 2013, »
I've went through all my power supplies, and not a single 6V one with more than 800 ma....

I've searched online, and found several 2A supplies out there, but found on ebay some 3A suckers at under $9...

You are not allowed to view links. Register or Login

Any suggestions on 6V power supplies...or take my chances?

Jon

Offline Steve Gase

  • Sr. Member
  • ****
  • Posts: 2915
    • WinterLightShow in Georgetown, TX
Re: Bobcat 6V power supply
« Reply #1 on: July 15, 2013, »
Mouser has adapters:
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login

Images are for reference only
See Product Specifications
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login

Images are for reference only
See Product Specifications
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login  |  110K channels, 50K lights  |  Nutcracker, Falcon, DLA, HolidayCoro

Offline tmcteer

  • Sr. Member
  • ****
  • Posts: 186
Re: Bobcat 6V power supply
« Reply #2 on: July 15, 2013, »
I've used 5vdc 2000 ma power supplies. The measured output was 5.2vdc on 2 buckey skulls running the jaw.

Offline n1ist

  • Moderator
  • Sr. Member
  • *****
  • Posts: 760
  • 02148
Re: Bobcat 6V power supply
« Reply #3 on: July 16, 2013, »
5V should be fine for most applications.  Some of the bigger servos want a little  higher voltage for speed.
/mike