I'am over 4096 channel ( Solved )and Big Thank to membre for help)

[Danbe]

I'am over 4096 channel with my arche 3711 to 4430  I have 2 Arche 120 nodes each
First Arche working good But 2 Arche channel over 4096 is not working
How I setup my PixelNet 16 Port Active Hub or my Pixelnet EtherDongle to have more channel

I use Xlight and LOR
My ssc channel start at 4071   

[jnealand]

You will have to get your count down under 4096 or get a second hub for universe 2.  You might try grouping your 120 nodes into groups of 10.  that would make it look like 12 nodes per arch or 24 total or 72 channels which would let you stay under 4096.  that will also simplify your programming for the arches.

[rm357]

Channel 4097 is actually channel 1 on the second pair of wires coming out of the EtD. You need a second hub and to modify the second arch to start at or above 4097. All of the addresses used by an ssc have to be in the same pixelnet universe.

[Danbe]

I have 3 more hub for spare  I can't find ( i can't remember) the setting need to make on Hub there are 3 pin with pin I need to change   Thank
 

[keitha43]

On the second hub set the pixelnet jumpers to 2. This attachment explains it at the "SSC Channel # and LSP Channel # " section. For example channel 4097 in your programming software is the same as channel #1 on an SSC if the jumpers are set to universe 2. SSC's are always channels 1-4096.

[Danbe]

Big Thank  It working now