zeus part

[kfxi]

I was installing the 4 pin connectors where the computer plugs into the zeus board and I broke a pin, "dumb dumb dumb". Can someone give me the part number where I can order a replacement from mouser.

Thanks
Ken

[maffeirw]

I was installing the 4 pin connectors where the computer plugs into the zeus board and I broke a pin, "dumb dumb dumb". Can someone give me the part number where I can order a replacement from mouser.

Thanks
Ken

If you referring to the 4 pin Molex connector which attaches to a computer power supply see the link
You are not allowed to view links. Register or Login
Also I believe that, when holding the PCB so you can read the Lynx Zeus 16 label, the far left pin is +12v, the center two pins are connected together for the ground and the right most pin is unused in the Zeus, so if you broke either the far right pin or one of the two center pins you should be able to do without it, if you can connect the plug without shorting any of the other pins.
Ron

[kfxi]

Thganks that is the part I needed

Ken