DMX out on the Hub is wired how to a XLR dmx plug?

[arw01]

Picked up three of Ray's 12v RGB DMX floods, they have a 3 pin pigtail for the signal, and I am wondering what is the layout from a CAT 5 from our DMX out on the hubs so I know how to wire up a cable.

Alan

[Steve Gase]

The DMX port:

1 = DMX+  (white/orange)
2 = DMX-   (orange)
3,4,5,6,7,8 = unused



Note: there is no ground wire on the Lynx DMX and Pixelnet signal wiring.