Author Topic: xlights set up / software or hardware issue  (Read 781 times)

Offline lizard050

  • Full Member
  • ***
  • Posts: 84
xlights set up / software or hardware issue
« on: December 11, 2014, »
I'm trying to get renard hardware, dmx (lynx) hardware and pixelnet 2 universes working together.  My set up is  3 usb outputs from pc.   1 to renard, 2 pixelnet dongles to combiner then to a an Active Hub.  From the active Hub I'm taking DMX out, pixelnet out to 12 sscs,  1 pixelnet out to 4 port passive hub and 1 to 2 zues'.  xlights is set up with renard channels 1st,  then 1 universe of pixelnet for my mega tree,  and a second pixelnet universe set up for the rest including the dmx channels.  Everything seems to test fine seperately.  However now putting it all togeter (2 dongle) if having problems.  I set both jumpers on the active hub to universe 2 and leave the dmx set on 1.  When this is set up this way everyhting on univerise 2 seems to randomly go on and off even with things turned off in xlights. 

Would the order set u in exlights of renard, pixelnet universes matter?

Should I be looking at the active hub ? 
Brad
South Florida

Offline lizard050

  • Full Member
  • ***
  • Posts: 84
Re: xlights set up / software or hardware issue
« Reply #1 on: December 13, 2014, »
always a relief when you get it figured out
Brad
South Florida