SOLD 3x - Lynx Express v5 assembled in CG-1500 w/ power cords - $105 each
These are 100% working units, they were just pulled in from the yard.
The open-case attached picture is of one of them. The boards have
been sprayed with Corrosion-X since I live in the PNW. One of these
is in a CG-1500 that has been painted green.
SOLD 1x - Lynx Express v5 assembled in CG-1500 w/ power cords - $95
This unit has a problem with the channel number display. I believe
the chip is bad. The display works sometimes but not others and sometimes
it is the middle digit missing and sometimes it is another one, IIRC.
Other than that, the unit functions correctly, it has served me well.
This board has also been sprayed with Corrosion-X. This is in a
CG-1500 that has been painted green.
SOLD 1x - Lynx Express v5 assembled but without case or cords - $75
This was my spare unit, so it has been built and tested but has never
been out in the yard. This unit has NOT been sprayed with Corrosion-X.
The LE's were also cleaned with PCB cleaner as well, but still may have
some of the white residue on the solder side.
The input power cords are 'Y' cords with one plug and the cord has a 'Y'
in it with two outputs and each output going to a separate input on the
LE. The output power cords are all 2' 3-wire monoprice extension cords
with the grounds connected even though we don't need it normally. There
is about 18" of cord sticking out the bottom of the CG-1500.
Paypal and shipping are not included.
Shipping will be from 98264 zip. If you are interested in these, let me know
what you want and I can put them in a box and weigh them and give you a total cost.
