Author Topic: WS2811 behaviour  (Read 975 times)

Offline DanHouston

  • Sr. Member
  • ****
  • Posts: 499
WS2811 behaviour
« on: November 13, 2016, »
I ordered some WS2811 strings and most of them just seem dead. If I plug/unplug them a few times I can occassionally get two of the strings to light up some of the nodes but they do not respond to the data. I have a known good controller and string and they work fine.

I'm contacting the seller of the strings, but thought I would ask here to see if anyone else has encountered this or has any thoughts.

Thanks,
Dan
2011 - Year #1
    4000 lights and 16 channels
    5 Songs sequenced
2012 - Year #2
    5000 lights and 123 channels
    8 Songs sequenced

Offline caretaker

  • Sr. Member
  • ****
  • Posts: 1770
Re: WS2811 behaviour
« Reply #1 on: November 13, 2016, »
Double check the wiring, i have heard some 2811's have the color wires mixed up on the ground and data. You can check the the first pixel and should be able to read which is which.
Jeff Squires
You are not allowed to view links. Register or Login

Offline DanHouston

  • Sr. Member
  • ****
  • Posts: 499
Re: WS2811 behaviour
« Reply #2 on: November 13, 2016, »
Yeah. I took a look at that and it's hard to see, but the labels look like I have them correct. +12v, D, Gnd.

Is there a right and wrong side of the string to connect the SSC too?

I have a set from a different manufacturer and they say the input side is the side opposite the IC. These did not have a label with them, but had a pigtail on them suggesting the input side is the same side as the IC.
2011 - Year #1
    4000 lights and 16 channels
    5 Songs sequenced
2012 - Year #2
    5000 lights and 123 channels
    8 Songs sequenced

Offline duane.mosley

  • Sr. Member
  • ****
  • Posts: 988
    • hearthstonelights.com
Re: WS2811 behaviour
« Reply #3 on: November 13, 2016, »
the 2811's i just got from ray are Red=12v  blue=ground  green= data. the ground and data are reversed from the 1804's. i am noticing issues with my 2811's not being full white over 100 nodes.
Florence, KY


facebook.com/hearthstonelights

Offline TexasStingray

  • Coop Manager
  • Sr. Member
  • *
  • Posts: 791
Re: WS2811 behaviour
« Reply #4 on: November 13, 2016, »
You are not allowed to view links. Register or Login
Is there a right and wrong side of the string to connect the SSC too?
[/quote

Yes, just like any item there is an in and an out. You'll have to look at both sides, the side with the writing is generally the in.]
Scott Wanner
TX

Watch my videos
You are not allowed to view links. Register or Login