Author Topic: zues 8 won't run off active hub  (Read 331 times)

Offline onesmoothhead

  • Sr. Member
  • ****
  • Posts: 865
  • 87031
    • Listen to the Lights New Mexico
zues 8 won't run off active hub
« on: November 20, 2016, »
Heelo, quick question, my Zues 8bis set to channel 4097. I am feeding pixel net signal from an active hub. I test mode it will test fine, but in show mode I get nothing on my zues mega tree. Any ideas?

Offline tbone321

  • Sr. Member
  • ****
  • Posts: 3991
Re: zues 8 won't run off active hub
« Reply #1 on: November 20, 2016, »
A PixelNet universe only has 4096 channels so setting it to 4097 is not a valid address.  Show channel 4097 would be Universe 2 Channel 1 in PixelNet terms.  Also a Zeus does not connect to an active hub controller output and doing so would damage the Zeus.  Make sure that the Zeus is only connected to a full PixelNet output.
If at first you don't succeed,
your not cut out for sky diving

Offline onesmoothhead

  • Sr. Member
  • ****
  • Posts: 865
  • 87031
    • Listen to the Lights New Mexico
Re: zues 8 won't run off active hub
« Reply #2 on: November 20, 2016, »
It is on a pixenet output. I should have been more clear. It turns out I had xLights model set incorrect. It works like a charm on Universe 2. Thanks as always.