Hardware > Lynx USB DMX Dongle

USB Dongle with PixelNet Firmare question

(1/1)

Jasonlnlv:
I have a USB DMX Dongle that I have been running for years connected to a Falcon Pi Player to 6 Lynx Express v5 units running fine - I have a second USB Dongle I built and flashed it with PixelNet firmware just in case ... now the Just in case has come up and I still want to use my 6 LE DMX but want to add the Holiday Coro "CCR" Pixel MegaTree Kit - 16 Strips/Ribbons / 800 Pixels / 2,400 DMX Channels / Ready2Run Assembled - with AlphaPix 16 Controller.

The USB DMX Dongle only does 512 channels - so I assume that if I use the UBB PixelNet Dongle connected from the FPP I can add this and it will still run the DMX boxes and the Holiday Coro tree together?

Is this right or do I need something else?

tbone321:
If what you are saying is that you intend to connect both dongles to the FPP, yes, you can do that.  Just make sure to map the channels to the correct device.  If you are thinking that you want to switch out the DMX dongle with the PixelNet dongle, that will not work as the LE's do not understand the PixelNet protocol.

Staples:
You are not allowed to view links. Register or LoginIf what you are saying is that you You are not allowed to view links. Register or Login and intend to connect both dongles to the FPP, yes, you can do that.  Just make sure to map the channels to the correct device.  If you are thinking that you want to switch out the DMX dongle with the PixelNet dongle, that will not work as the LE's do not understand the PixelNet protocol.

--- End quote ---

Hi Tbone321, can you have more than one device when you this btw?

tbone321:
I don't understand your question.  You can have multiple dongles connected to FPP for their input source but you cannot have multiple dongles connected to the same controller circuit for their output because they would interfere with each other. 

caretaker:
You are not allowed to view links. Register or LoginI have a USB DMX Dongle that I have been running for years connected to a Falcon Pi Player to 6 Lynx Express v5 units running fine - I have a second USB Dongle I built and flashed it with PixelNet firmware just in case ... now the Just in case has come up and I still want to use my 6 LE DMX but want to add the Holiday Coro "CCR" Pixel MegaTree Kit - 16 Strips/Ribbons / 800 Pixels / 2,400 DMX Channels / Ready2Run Assembled - with AlphaPix 16 Controller.

The USB DMX Dongle only does 512 channels - so I assume that if I use the UBB PixelNet Dongle connected from the FPP I can add this and it will still run the DMX boxes and the Holiday Coro tree together?

Is this right or do I need something else?

--- End quote ---
The Alpha Pix 16 works with E 1.31 (DMX over ethernet) so you will need to connect your FPP to a hub and then run a cat 5/6 line out to your Alpha Pix 16. You will also need to setup the output on the FPP for E 1.31 and set up the number of universes you will need.

Navigation

[0] Message Index