Author Topic: Pickit in Sacramento??  (Read 1730 times)

Offline Tigman009

  • Sr. Member
  • ****
  • Posts: 207
Pickit in Sacramento??
« on: December 02, 2017, »
Hoping there is someone in the Sacramento Area that can reflash my pic. I bought a bunch of kits and none of them seem to work?

Offline tbone321

  • Sr. Member
  • ****
  • Posts: 4054
Re: Pickit in Sacramento??
« Reply #1 on: December 02, 2017, »
Are you getting the 5V and 3.3V LED's lighting up?
If at first you don't succeed,
your not cut out for sky diving

Offline Tigman009

  • Sr. Member
  • ****
  • Posts: 207
Re: Pickit in Sacramento??
« Reply #2 on: December 02, 2017, »
yes i get both lights but nothing comes out. I

Offline tbone321

  • Sr. Member
  • ****
  • Posts: 4054
Re: Pickit in Sacramento??
« Reply #3 on: December 02, 2017, »
Most of the PIC's were programmed in the coop purchases.  Does any text appear on the LE display when you power it up and if so, what is the number at the end?
If at first you don't succeed,
your not cut out for sky diving

Offline Tigman009

  • Sr. Member
  • ****
  • Posts: 207
Re: Pickit in Sacramento??
« Reply #4 on: December 03, 2017, »
it say 50 HZ.

Offline Tigman009

  • Sr. Member
  • ****
  • Posts: 207
Re: Pickit in Sacramento??
« Reply #5 on: December 03, 2017, »
I have been researching the thread and it should read 60hz. I have removed the H11A chip and put in a known good one and still get 50hz. I touched up the solder joints and still get 50hz? I am still reading past threads in hopes I can figure out what is wrong.