Mouser Back Order

[BrianO]

Anyone be able to help me out with some alternate parts, or maybe you have some laying around?  I need the following, in the listed qtys.:

Mouser part #'s

571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)
604-SA04-11GWA  LED Displays .4 GREEN  (need 12)
688-SPPH430200  Pushbutton Switches VERT MOMENTRY 2 POLE  (need
294-15K-RC  Carbon Film Resistors 15Kohms 5%
   

This is my first year attempting to build something like this, although I have messed with MOBOs and stuff like that.  I'm no elec engineer, thats for sure.  So please forgive my stupidity and lack of knowledge on how to replace these parts.  I found the missing dongle parts I needed, by reading the boards, but have not seen much about these parts.  tried a few of the other vendors online, but they didnt have the parts either.

Thanks in advance for any assistance rendered!!

I must have blinky blinky, flashy flashy.....I'm hooked!!!  might have to start going to support group meetings....lol
   

[sirwesley]

Did you place an order for these parts already on Mouser?  I purchase the backordered parts from them all the time, and they usually get them out to me within 4-5 days (once they get them back in stock).  I believe I'm actually backordered for those parts as well.  I believe you'll have plenty of work to do before they get those parts to you.  I would just go ahead and get in queue on those backordered parts and hope for the best.  

I must have blinky blinky, flashy flashy.....I'm hooked!!!  might have to start going to support group meetings....lol

Welcome to your support group!  That's why we're here!  :p

[BrianO]

From what I read, Looks like the stuff is several weeks out from the manufacturer.

[mschell]

From what I've seen on selected parts, some manufacturers aren't living up to their delivery schedule.  I've had a few items on an order that I placed back in September still not come available, and Mouser keeps pushing back their delivery date.

So just check the planned delivery dates before you place the order.

Also, Digi-Key and several other places sometimes have items in stock that Mouser doesn't, although some have minimum quantity limits.

[BrianO]

I was able to fine one part at jameco, but the other three are still outstanding....

[sirwesley]

What's the difference between these? Might be a replaceable part.

Mouser Part #:   571-5569284-1 as a replacement for 571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)

For 688-SPPH430200  Pushbutton Switches VERT MOMENTRY 2 POLE  this place says they have it in stock:
You are not allowed to view links. Register or Login However they require a $35 min purchase  

(removed non-valid part number to eliminate confusion)

[RJ]

What's the difference between these? Might be a replaceable part.

Mouser Part #:   571-5569284-1 as a replacement for 571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)

Mouser Part #:   688-SPPH430100 as a replacement for 688-SPPH430200  Pushbutton Switches VERT MOMENTRY 2 POLE  (it's latching but could work).

That is not a push button but a latching button. Will not work.

RJ

[sirwesley]

I was able to fine one part at jameco, but the other three are still outstanding....

What part did you find at Jameco?

[BrianO]

I was able to fine one part at jameco, but the other three are still outstanding....

What part did you find at Jameco?

the rj45 jacks
571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)

thats all I have been able to find so far.  I didnt order them yet, so I didnt read and see if there was a minimum order.

[BrianO]

What's the difference between these? Might be a replaceable part.

Mouser Part #:   571-5569284-1 as a replacement for 571-5556416-1 Telecom & Ethernet Connectors 8 PCB TOP ENTRY (need 12)

Mouser Part #:   688-SPPH430100 as a replacement for 688-SPPH430200  Pushbutton Switches VERT MOMENTRY 2 POLE  (it's latching but could work).

That is not a push button but a latching button. Will not work.

RJ

Will this part work for the pushbutton switch?  You are not allowed to view links. Register or Login

[BrianO]

Will this LED display work?  The wavelength is 3nm different.  I have no idea, but this one they have in stock. 

You are not allowed to view links. Register or Login

[BrianO]

Will this LED display work?  The wavelength is 3nm different.  I have no idea, but this one they have in stock. 

You are not allowed to view links. Register or Login

I ordered the correct part directly from Kingbright.  Shipping was more than the total parts cost....ouch!!!

[sirwesley]

What did you decide on the push button switch? We could go in together on some of these things and save some shipping costs.  I'm backordered on the same items. 

[BrianO]

Havent found anything for the switch or resistor so far.  Did find the LED displays, ordered directly from Kingbright.  also found the RJ45 jacks from Jameco.  I am going to order the jacks today from Jameco.  do you want in?  send me PM with amount you need. 

[BrianO]

I think the only part I am missing now, are the switches (688-spph430200)  I need 8, if anyone has some to lend.  I think sirwesley needs some too.  Resistor I will look for at the shack.  got the displays and the rj45 jacks ordered.