Author Topic: Longer Triac Leggs Needed  (Read 1429 times)

Offline paul58

  • Full Member
  • ***
  • Posts: 70
Longer Triac Leggs Needed
« on: April 11, 2010, »
I've finished 5 of 8 LE's and had only a couple of minor troubles. One was a PIC to be reflashed. I found 1 bad rs485 chip. The next problem is my triac leggs are too short for this heat sink. Guess these things happen. Reckon RJ will have another heatsink and rs485 chip to swap out? Thanks:Paul ???

Offline coachers

  • Sr. Member
  • ****
  • Posts: 265
    • Coachers
Re: Longer Triac Leggs Needed
« Reply #1 on: April 11, 2010, »
 Oh crap!

  I didn't get it till I zoom in on the picture...
May you have Good Health...
Great Wealth.....
And your stein never be empty.

Offline rrowan

  • Administrator
  • Sr. Member
  • *****
  • Posts: 5899
  • 08096
Re: Longer Triac Leggs Needed
« Reply #2 on: April 11, 2010, »
Hi Paul

Yeah I think you got a bad heatsink. Unless you have one of those triac leg stretchers

How do you know the rs485 is bad? I don't recall hearing them fail.

Did you PM RJ about the heatsink?

Rick R.
Light Animation Hobby - Having fun and Learning at the same time. (21st member of DLA)
You are not allowed to view links. Register or Login
Warning SOME assembly required

Offline vairmoose

  • Patron Member
  • Sr. Member
  • ****
  • Posts: 827
Re: Longer Triac Leggs Needed
« Reply #3 on: April 11, 2010, »
yep.... that be a definite oops......    could be used by drilling / threading two holes.... but then the wording would be buried.

3 today (standing at light switch, holding two lighters)
Going live in 2012

Offline lineman

  • Coop Manager
  • Sr. Member
  • *
  • Posts: 1978
Re: Longer Triac Leggs Needed
« Reply #4 on: April 11, 2010, »
Holy Cow Batman , Yea you are not kiddin I am sure RJ will help  :o


                                                  Jeff
Jeff


Offline RJ

  • Administrator
  • Sr. Member
  • *****
  • Posts: 8519
Re: Longer Triac Leggs Needed
« Reply #5 on: April 11, 2010, »
Yes,

Pm me your address and what you need (Heatsink, RS485)

RJ
Innovation beats imitation - and it's more satisfying

Offline paul58

  • Full Member
  • ***
  • Posts: 70
Re: Longer Triac Leggs Needed
« Reply #6 on: April 11, 2010, »
rrowan, the data link led didn't come on during testing. I swaped the two chips around and got the data link led on.  The LE tested out ok. Swaped them back and no data led.