BOM discrepancy questions

[dlhoppe]

I'm sorting parts from Mouser for some Ex/Rx units. It appears the "Mouser Direct" link as well as the manual for the Ex/Rx v2 does not agree with the text-based BOM in the wiki.

The text-based BOM lists the regulator as "511-LD1086V33". See You are not allowed to view links. Register or Login
The Mouser Direct link and the manual shows the regulator as "511-LD1117V33". See You are not allowed to view links. Register or Login

Is the lower current one used for colder temps? I ended up with the 511-LD1117V33 because I used the Mouser Direct link. Is this ok?


Also, Mouser was out of stock on the 140-XRL25V100-RC cap. I found the "equivalent" on the Mouser website as 140-REA101M1EBK0611P. Before I begin assembly, can someone let me know if it's ok to substitute with 140-REA101M1EBK0611P?


Thanks for your help,
Dave

[rmp2917]

511-LD1117V33 is the correct part number. I believe the LD1086V33 was used in one of the coops because the original part was backordered. See the following thread.
You are not allowed to view links. Register or Login

Also note that on the BOM for the Tx/Rx there is an alternate 3V regulator listed, this was done to cover a back order condition with Mouser on the original part.

Bill

The two caps have the same specs. They are simply different suppliers so it should work fine.

[dlhoppe]

Thank you!