Author Topic: 680 Ohm Resistor Array  (Read 3456 times)

Offline trekster

  • Sr. Member
  • ****
  • Posts: 1279
  • A Lynx Express Device........ Fascinating! ;
    • My 2010 Videos
680 Ohm Resistor Array
« on: March 08, 2011, »
The back ordered resistors for the ssr4's.  I found what looks the same on ebay.  Is this the equivalent part to replace the back ordered ones from Mouser?

Not bad price....$3.25 for 20 of them.

You are not allowed to view links. Register or Login

Ron
My 2010 Videos
You are not allowed to view links. Register or Login

Offline gforman

  • Sr. Member
  • ****
  • Posts: 1087
Re: 680 Ohm Resistor Array
« Reply #1 on: March 08, 2011, »
This may work but it is only listed as .2 watt, the mouser link for the SSR4You are not allowed to view links. Register or Login is 1 watt.

"Opportunity is missed by most people because it is dressed in overalls and looks like work"
  Thomas Edison

Offline ILOVETOTRYDIY

  • Full Member
  • ***
  • Posts: 93
Re: 680 Ohm Resistor Array
« Reply #2 on: March 08, 2011, »
due to the back order issue with Mouser I bought mine from Digi Key

« Last Edit: March 08, 2011, by ILOVETOTRYDIY »
When you're curious, you find lots of interesting things to do.  Walter Elias Disney

Offline chrisatpsu

  • Sr. Member
  • ****
  • Posts: 3729
  • ahhh, yes... my new blink-i-nator 3000!!!
Re: 680 Ohm Resistor Array
« Reply #3 on: March 08, 2011, »
I ordered this from Newark.

You are not allowed to view links. Register or Login

same electrical specs, just a different package (black box - like an IC on end, as opposed to the tan bubble look)
about 48 cents each

EDIT: but now i see they dont have those in stock either  : (
EDIT AGAIN: but mouser has the part (You are not allowed to view links. Register or Login)


Mouser lists it as a 68 ohm resister network, but that's a typo...   it is deffinately a 680 ohm resistor network.
4308R-102-681LF
43= Molded SIP
08= Number of pins
R= Thick Film
102=Isolated
681= first two numbers is the value, third digit is how many 0's to follow, in this case 1, so value is 680 ohm
LF = Tin Plated


« Last Edit: March 08, 2011, by chrisatpsu »
To rule the entire tri-state area!  What's that? Perry the Platypus!!!

Offline ILOVETOTRYDIY

  • Full Member
  • ***
  • Posts: 93
Re: 680 Ohm Resistor Array
« Reply #4 on: March 08, 2011, »
here is the one I bought
You are not allowed to view links. Register or Login
Mouser has it too both at .54 each
You are not allowed to view links. Register or Login 
 
When you're curious, you find lots of interesting things to do.  Walter Elias Disney

Offline gforman

  • Sr. Member
  • ****
  • Posts: 1087
Re: 680 Ohm Resistor Array
« Reply #5 on: March 08, 2011, »
on further review they may work, here is the link to the specified resistor network You are not allowed to view links. Register or Login

I bought out my local HSC at 10 Cents each

Good luck :)
"Opportunity is missed by most people because it is dressed in overalls and looks like work"
  Thomas Edison

Offline chrisatpsu

  • Sr. Member
  • ****
  • Posts: 3729
  • ahhh, yes... my new blink-i-nator 3000!!!
Re: 680 Ohm Resistor Array
« Reply #6 on: March 08, 2011, »
Quote
here is the one I bought
You are not allowed to view links. Register or Login
Mouser has it too both at .54 each
You are not allowed to view links. Register or Login

DONT USE THAT ONE 

it's 680K = 680,000 ohms, not 680 ohms
To rule the entire tri-state area!  What's that? Perry the Platypus!!!

Offline ILOVETOTRYDIY

  • Full Member
  • ***
  • Posts: 93
Re: 680 Ohm Resistor Array
« Reply #7 on: March 08, 2011, »
thanks for pointing that out!  <fp.
When you're curious, you find lots of interesting things to do.  Walter Elias Disney

Offline trekster

  • Sr. Member
  • ****
  • Posts: 1279
  • A Lynx Express Device........ Fascinating! ;
    • My 2010 Videos
Re: 680 Ohm Resistor Array
« Reply #8 on: March 08, 2011, »
You are not allowed to view links. Register or Login
on further review they may work, here is the link to the specified resistor network You are not allowed to view links. Register or Login

I bought out my local HSC at 10 Cents each

Good luck :)

Yes I see.  It is rated at .3 watt each resistor.  I bet the 1 watt rating is for the whole pack of resistors and not one.  The ones I ordered off ebay are .2 watt.  I will see what happens.  I bet they will be fine.

Thanks Guys....
Ron
My 2010 Videos
You are not allowed to view links. Register or Login

Offline jnealand

  • Patron Member
  • Sr. Member
  • ****
  • Posts: 2494
Re: 680 Ohm Resistor Array
« Reply #9 on: April 11, 2011, »
Looks like we need RJ to update the SSR4 Mouser order definition

Mouser #:    140-XRL25V100-RC    
Mfr. #:    140-XRL25V100-RC
Manufacturer:    Xicon
Desc.:    Aluminum Electrolytic Capacitors - Leaded 25V 100uF 20%
RoHS:    RoHS Compliant
Info:    View Additional Product Info
Lifecycle:    End of Life: Scheduled for obsolescence and will be discontinued by the supplier.
   
Not Available

Possible Replacement
140-REA101M1EBK0611P
Jim Nealand
Kennesaw, GA

Offline chrisatpsu

  • Sr. Member
  • ****
  • Posts: 3729
  • ahhh, yes... my new blink-i-nator 3000!!!
Re: 680 Ohm Resistor Array
« Reply #10 on: April 11, 2011, »
The capacitor was talked about in this thread if you still need a replacement part.

You are not allowed to view links. Register or Login
To rule the entire tri-state area!  What's that? Perry the Platypus!!!

Offline jnealand

  • Patron Member
  • Sr. Member
  • ****
  • Posts: 2494
Re: 680 Ohm Resistor Array
« Reply #11 on: April 11, 2011, »
You are not allowed to view links. Register or Login
The capacitor was talked about in this thread if you still need a replacement part.

You are not allowed to view links. Register or Login

We still need RJ to update the Mouser BOM!
Jim Nealand
Kennesaw, GA