Author Topic: Spec for correct 49.9 ohm resistor  (Read 1686 times)

Offline pHoZfoRus

  • Full Member
  • ***
  • Posts: 52
Spec for correct 49.9 ohm resistor
« on: February 02, 2012, »
Hi everyone - RJ has already kindly dispatched the replacement resistors for the EtD, however it appears that they may not make it in the mail to Australia (posted from the US around the 15th Dec).

I am looking to find them locally, however I would like to confirm the specs on the resistor before ordering.  Are they 1/4 watt as per the below Mouser link?

You are not allowed to view links. Register or Login

Thanks in advance.  Russell

Offline pk

  • Patron Member
  • Sr. Member
  • ****
  • Posts: 618
  • 80004
Re: Spec for correct 49.9 ohm resistor
« Reply #1 on: February 02, 2012, »
Hi Russell-

The link you posted is the correct part - 49.9 ohms 1%  1/4 W


Offline pHoZfoRus

  • Full Member
  • ***
  • Posts: 52
Re: Spec for correct 49.9 ohm resistor
« Reply #2 on: February 02, 2012, »
Thanks pk. Gotta order these so I can get into building the EtD.  The anticipation is killing me!

Russell

Offline pk

  • Patron Member
  • Sr. Member
  • ****
  • Posts: 618
  • 80004
Re: Spec for correct 49.9 ohm resistor
« Reply #3 on: February 02, 2012, »
be sure to use the latest firmware and dll's in the Wiki.  The files were updated yesterday.

Offline odlids

  • Full Member
  • ***
  • Posts: 67
Re: Spec for correct 49.9 ohm resistor
« Reply #4 on: February 02, 2012, »
I've got to admit that I didn't wait for the 49.9 Ohm resistors. I just used 2 x 100 Ohm resistors in parallel, seems to work OK.

Cheers
Odlid Dave
To err is human but why oh why must I be so human?