Yeah, it's a long winded way to get the more complex sequences to work.
I'm holding out hope that the re-write of LSP that David is doing will sort out the scheduler issues. In addition, we might get an export to the conductor for the etherdongle, so I'm trying to cover all the bases.
One question on the sequence that I did successfully export to LMS and then put through your tool and finally through XLights.
I'm exporting from LSP to LMS format.
I've got about 5000 channels sequentially numbered and set up for E1.31 in LSP
I also have two AC16 controllers (D-Light each 16 channels) connected via a USB dongle.
I assume when it exports to LMS format that the 32 channels from the AC controllers also get exported?
Once I've exported I use the setnet.py file and set up my network in the file
I can successfully set up my LED FlexStrips in the setnet.py file, that seems straight forward, but do I also add my two AC controller channels in that file as well.
I'm not sure how to do that
After checking the setnet.py file I run the following command in my convert directory:
C:\Python27\python.exe setnet.py
After that has completed I run this command:
XMLSearchReplace.exe /F="c:\convert\new*.LMS" /S="unit" /R="1" /O=va
After that's completed I load the new file into xLights file converter and convert to the LMS file to xLights format
After that, I can load the final file into the xLights scheduler (which is working on the simple sequence), but I haven't checked if the two 16 channel controllers have made it through the conversion process.
I'm assuming that since I didn't define them in the setnet.py file, they don't make it through the rest of the conversion process?