Ok everyone,
I haven't checked anything yet but this is what I have. ETD 1 flashed with pixel net hooked to my old laptop direct with a xover cable then to my active hub with a mega sphere ( 3 CH. DMX set to 1) plugged into dmx out with xlights set up with 8 universes of E1.31 and the first universe all checked. Put power to the etd light comes on data light flickers and the laptop acuires an ip automatically. Run a test in xlights all is well, YEAAAAAAA. I'll post a small video.
Etd # 2 not so good. Both lights on this one comes on and stays on even the activity light. I've reflashed ETD, rebooted the laptop. Disabled and reenabled the network It goes thru the enableing but the activity light just stay on. I acuires a ip but again the acivity and conection on the etd stays on.
Just seeing where I should start trouble shooting. I'm going to pull the board out and do some inspections. (chips, sodering, etc, etc. )
let me know where else to start,
Thanks,
animal >.