RJ,
First of all thanks for the help. Got it fixed and running
Still not sure exactly what the problem was. No continuity between 330 ohm and pin 3. Resoldered bottom, still no continuity. Resoldered from top, no continuity. Did again...still no continuity
Stuck a test lead between resistor and solder joint on bottom of pcb at pin 3. I got continuity
Did the same on ch's 13,14,15, all LED's work.
Soldered jumper wires on effected traces every thing is good now.
Only thing I can think of is maybe the via's are not connected to the trace??
Again, thanks for the help.
Brad