New to LSP. Got the license installed and I've done LOR in the past so I'm not a complete n00b (I feel like it though right now)...
I just built two Lynx Express Boards and the USB Lynx Ver2 dongle. The USB Lynx dongle came up on Com4 after I installed the drivers. RJ's configuration program was able to set the light curves. The Step pattern program works and does the patterns fine. The Lynx Express TST shows all channels work and I get the three LEDs lit at the end showing ZC, DMX, and Done.
Inside of LSP I made a new musical sequence and added a Lynx Express 16 channel controller and set it up using the Enttec DMX Pro on Com4. I can right click on the controller and use the Test Controller Hardware and manually set all the channels individually and it works fine.
Now when I turn on the Output on the top bar and double-check the light bulb is ON under the Playback menu the sequence plays through the timeline and I hear the music but the Lynx Express does nothing. The Lynx Express shows the Data Link light so I know the DMX is being sent plus the Test Controller Hardware should of verified that.
So am I missing something here as everything seems to work except playing a sequence in LSP.
Thanks,
Gary