Leo (Lortiz) had the idea,
You are not allowed to view links.
Register or
LoginRJ said don't run more than one per port.
I am running regular DMX into the pixelnet port as Tom said but feeding the 12 VAC into the DC Positive and negative in on the Passive Hub.
Then you have to make sure the Cat5 end at the Aether is wired correctly or it could be sparky and smokey.
I used the wire pattern from the SSC to know which side was which. The only concern brought up from the other thread was that the Passive hub has 5amp fuses and the Aether has 7amp.
I also only wired 1 cat5 for input into each Aether so I cant daisy chain. I also bought different colored Cat5 cables (red) that I only use for the Aethers to help prevent the accidental plugging into the wrong port issue.