So I have LSP and have followed the set up doc to export from LSP, convert and play in Xlights.
I've followed the guide here (I've followed the guide exactly, well at least I think I did):
You are not allowed to view links.
Register or
LoginI have 16 LED Flexstrips connected to two 16 Port Active Hubs.
All the strips are number sequentially, then I have two D-Light AC16's.
All work in LSP so I've all the H/W is working.
The Hub are connected to my PC via the etherdongle.
My Laptop is connected to the Etherdongle wirelessly using the E131 protocol. Etherdongle and hubs are flashed for Pixelnet.
Here's the set up of my file for setnet.py:
networks = [{'stIndex':1,'endIndex':180, 'net':0},
{'stIndex':181,'endIndex':540, 'net':1},
{'stIndex':541,'endIndex':612, 'net':2},
{'stIndex':613,'endIndex':792, 'net':3},
{'stIndex':793,'endIndex':1152, 'net':4},
{'stIndex':1153,'endIndex':1512, 'net':5},
{'stIndex':1513,'endIndex':1872, 'net':6},
{'stIndex':1873,'endIndex':1944, 'net':7},
{'stIndex':1945,'endIndex':2304, 'net':8},
{'stIndex':2305,'endIndex':2439, 'net':9},
{'stIndex':2440,'endIndex':2574, 'net':10},
{'stIndex':2575,'endIndex':2817, 'net':11},
{'stIndex':2818,'endIndex':3177, 'net':12},
{'stIndex':3178,'endIndex':3537, 'net':13},
{'stIndex':3538,'endIndex':3897, 'net':14},
{'stIndex':4097,'endIndex':4456, 'net':15},
{'stIndex':4457,'endIndex':4473, 'net':16},
{'stIndex':4474,'endIndex':4490, 'net':17},]
Here's my hardware set up in Xlights:
When I run the final file in Xlights, some of the LED's light up, but not correctly, wrong colors, wrong flex strips. The AC16's do not respond at all. I can light up the flexstrips and the AC16's with the H/W test in Xlights, I just can't get the converted sequence to run correctly. Any tips or pointers to get this to work?