Search results

As we use SSR's to actually switch the AC to the light strings the SSR will need to go between the plug pack and the light string so there will be Now you could buy lots of power boards and use the plug packs to power the SSR's but this is neither practical or sensible.

|'''On Board SSR''' ...|<center>'''SSR4'''</center>[[Image:Ssr4-1.jpg|right|thumb|160px|4 Channel SSR plus DMX option]]

*It then sends signals out to a set of Solid State Relays (SSR's) *The grinch can operate up to 16 of the standard DIY SSR's and each of them has four channels. This give you 64 channels of light co

This can be either a plain old 16 channel SSR board or it can be converted to be a 16 channel DMX controlled unit. == Plain SSR ==

Now for a SSR with 1A per channel rating. ...SSR we can have around 1000 - 0.1w bulbs so we could power around 3 x 4ch SSR's with maximum bulbs per channel.

...tware start channel programming as well as be compatible with standard DIY SSR’s. You need to install all of the 32 RG45 jacks for the SSR’s to hook to. I find it best to pop all the interior ones in and then do

...ll be very happy with. This controller was my attempt to design the nicest SSR that can also be a 4 channel DMX controller available for the do it yoursel Ok we are ready to start assembly of the SSR4. We will first build it as a SSR only and then add the additional parts kit to make it a full blown DMX cont

...design of the Solid State Relay like do it yourselfers use on the external ssr design controllers like the Freestyle. the twist is it can be made a full 4 channel dmx controller and ssr unit with the addition of a few inexpensive parts. This will give you free

'''Note, this is for the PIC18F's for Freestyle, MR16, SSR with DMX option.'''

In a basic way all SSR are On/Off at their core. Some are not dimmable as they are what is called The SSR is triggered at some point in the cycle. It can be at the very beginning an

...controller to an SSR so that there is enough power to turn on (or off) the SSR.

...c has port lines that typical hook to the rj45s to send signals out to the SSR's. When these lines go low (Grounded) then it turns on the opto and fires t

...be very happy with. The EXPRESS is my attempt to design the best internal SSR dimmer available for the do it yourselfer like you. What you are about to a

It will have the SSR's on board. It will have the wireless connector to plug the wireless board ...rnal SSR based Controller that will operate 1 to 32 4 channel standard DIY SSR's giving you 128 channels of lighting control from one controller. It has i

...be very happy with. The EXPRESS is my attempt to design the best internal SSR dimmer available for the do it yourselfer like you. What you are about to a

...be very happy with. The EXPRESS is my attempt to design the best internal SSR dimmer available for the do it yourselfer like you. What you are about to a

|'''On Board SSR''' |<center>'''SSR4'''</center>[[Image:Ssr4-1.jpg|left|thumb|160px|4 Channel SSR plus DMX option]]

...ll be very happy with. This controller was my attempt to design the nicest SSR that can also be a 4 channel DMX controller available for the do it yoursel Ok we are ready to start assembly of the SSR4. We will first build it as a SSR only and then add the additional parts kit to make it a full blown DMX cont