Rick remove the current utility for me to stop any more people doing this.RJ
so if I get this right, I either need an sscv4 or the 24pin adapter from j1sys to reprogram my pics? I have the icsp28, is there a way to make that work?
Soon as I can I am sending out a Zeus only version of the utility to fix this. That way no one can make this mistake.RJ
You are not allowed to view links. Register or Loginso if I get this right, I either need an sscv4 or the 24pin adapter from j1sys to reprogram my pics? I have the icsp28, is there a way to make that work?please let me know so I can order what I need or try and get an sscv4 from someone. I only have sscv2
Duane, I used the same device to program my PICs. Make sure you set the jumpers in the correct position and build the jumper wire. I Tested by reading my PIC first. Sent from my iPhone using You are not allowed to view links. Register or Login
Do you have a electronics store near you? (Radio Shack, Fry's, etc).
AdministratorSr. Member*****Re: Welcome to the Beta« Reply #19 on: June 20, 2013, 07:39:42 AM »I am afriad this is one thing I can't help on as I do not have anyones adapter. I use the old Redneck adapter I built and posted in the wiki and it does not have jumpers. I just do it on a proto breadboard.It should be the same setup as a pic 24fj16GA002 chip from the previous ssc or express. so you could look for the jumpers for them as try that. Anyone else have one of these and can help?RJ
You are not allowed to view links. Register or LoginDo you have a electronics store near you? (Radio Shack, Fry's, etc).5 minutes away. thanks Rick. I saw that diagram but wasn't sure if it would work with the 24 pin.